Funworld Photo Play Barry
History
The 1996 Photo Play Barry was the first generation Photo Play bartop version by Funworld, released as part of the Photo Play 2000 generation. A new Barry with a refreshed look was released circa 1999, but has the same hardware specs.
Hardware
Below you'll find a table detailing the various hardware revisions.
Do note that all the motherboards used in the Early and Original Hardware revisions suffer from the Y2K bug.
The bug has been corrected on some motherboards by software on Update 99.
| Early Hardware | Original Hardware | Later Revision (or upgraded) | |
|---|---|---|---|
| Motherboard | Informtech (Unknown Model) | LS-486E Rev. C2, Zida Tomato 4DPS or Unknown Zida Board (486) | 5SFV0 (OEM Board made by Chaintech) |
| CPU | 386-class | Intel 486 DX4 100 MHz or ST 486 DX4 100 MHz | IDT WinChip C6 180 (C6-PSME180GA) (Normally underclocked to 133MHz) |
| RAM | 4 SIMMs of 256KB RAM | 1 SIMM of 4MB EDO/FPM RAM | 1 DIMM of 16MB SDRAM |
| Graphics Card | Unknown | Cirrus Logic CL-GD5440 1Mb PCI (Joytech Computer Co Ltd 54X62L) | Onboard Video (SIS 6306) |
| Sound Card | Unknown | Embedded in the IO Card | Onboard Audio (ESS AudioDrive 1869F) |
| IO Card | None | PP2000/CI-8000 Rev. B ISA IO Board. This IO Board consisted of 2 Serial + 1 Parallel + iButton/Dallas Reader + ESS AudioDrive ES1868F Sound Chip + TDA1517 Amplifier. | None. |
| Hard Disk | Unknown (But < 2GB) | Quantum Fireball EX 3.2AT or Seagate ST31722A | Quantum Fireball lct 20 10.2 AT or any of the earlier revision hard disk models. |
| Touchscreen Controller | Unknown | 3M Microtouch ISA Card PC BUS SMT3V (Serial) or Elo IntelliTouch 2310 Serial Controller | 3M Microtouch ISA Card PC BUS SMT3V (Serial) or Elo IntelliTouch 2310 Serial controller |
| Monitor | 14" CRT (13" Viewable) | 14" CRT (13" Viewable) | 14" CRT (13" Viewable) |