Funworld Photo Play 2000

History

This is the original Funworld Photo Play machine that took Europe by storm.

Hardware

These machines had two known hardware revisions. The original one and a later revision that was also installed as an upgrade kit as the original motherboards died.

The following hardware was used:

	Original Hardware	Later Revision (or upgraded)
Motherboard	LS-486E Rev. C2 or Zida Tomato 4DPS	5SFV0 (OEM Board made by Chaintech)
CPU	Intel 486 DX4 100 Mhz or ST 486 DX4 100 Mhz	IDT WinChip C6 180 (C6-PSME180GA) (Normally underclocked to 133MHz)
RAM	1 SIMM of 4MB EDO/FPM RAM	1 DIMM of 16MB SDRAM
Graphics Card	Cirrus Logic CL-GD5440 1Mb PCI (Joytech Computer Co Ltd 54X62L)	Onboard Video (SIS 6306)
Sound Card	Embedded in the IO Card	Onboard Audio (ESS AudioDrive 1869F)
IO Card	PP2000/CI-8000 Rev. B ISA IO Board This IO Board consisted of 2 Serial + 1 Parallel + iButton/Dallas Reader + ESS AudioDrive ES1868F Sound Chip + TDA1517 Amplifier.	None.
Hard Disk	Quantum Fireball EX 3.2AT or Seagate ST31722A	Quantum Fireball lct 20 10.2 AT or any of the earlier revision hard disk models.
Touchscreen Controller	3M Microtouch ISA Card PC BUS SMT3V (Serial) Elo IntelliTouch 2310 Serial Controller	3M Microtouch ISA Card PC BUS SMT3V (Serial) or Elo IntelliTouch 2310 Serial controller

Software Versions

All PTS-DOS:

• 1998
• 1999
• 2000
• 2001
• I.G.O 2
• I.G.O 3
• I.G.O 4
• I.G.O 5
• I.G.O 6
• I.G.O 7
• I.G.O 8

Reference

• Photos, flyers and partial manual @recreativas.org