Funworld Photo Play 2000: Difference between revisions
Jump to navigation
Jump to search
Major Hardware Revision |
|||
| Line 14: | Line 14: | ||
=== Hardware === | === Hardware === | ||
These machines had two known hardware revisions. The original one and a later revision that was also installed as an upgrade kit as the original motherboards died. | |||
The following hardware was used: | |||
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
! | ! | ||
!Later | !Original Hardware | ||
!Later Revision (or upgraded) | |||
|- | |- | ||
|Motherboard | |Motherboard | ||
| | |[https://theretroweb.com/motherboards/s/lucky-star-ls-486e-rev-c1-c2-imi-clock-gen LS-486E Rev. C2] or | ||
[https://theretroweb.com/motherboards/s/zida-4dps Zida Tomato 4DPS] | |||
| | |[https://theretroweb.com/motherboards/s/chaintech-5sfv0 5SFV0] (OEM Board made by Chaintech) | ||
|- | |- | ||
|CPU | |CPU | ||
| | |[https://theretroweb.com/cpus/1007 Intel 486 DX4 100 Mhz] or | ||
| | |||
[https://theretroweb.com/cpus/6252 ST 486 DX4 100 Mhz] | |||
|I[https://theretroweb.com/cpus/834 DT WinChip C6 180 (C6-PSME180GA)] (Normally underclocked to 133MHz) | |||
|- | |- | ||
|RAM | |RAM | ||
| | |1 SIMM of 4MB EDO/FPM RAM | ||
| | |1 DIMM of 16MB SDRAM | ||
|- | |- | ||
|Graphics Card | |Graphics Card | ||
| | |Cirrus Logic CL-GD5440 1Mb PCI (Joytech Computer Co Ltd 54X62L) | ||
| | |Onboard Video (SIS 6306) | ||
|- | |- | ||
|Sound Card | |Sound Card | ||
| | |Embedded in the IO Card | ||
| | |Onboard Audio (ESS AudioDrive 1869F) | ||
|- | |- | ||
|IO Card | |IO Card | ||
| | |PP2000/CI-8000 Rev. B ISA IO Board | ||
| | This IO Board consisted of 2 Serial + 1 Parallel + iButton/Dallas Reader + ESS AudioDrive ES1868F Sound Chip + TDA1517 Amplifier. | ||
|None. | |||
|- | |- | ||
|Hard Disk | |Hard Disk | ||
| | |Quantum Fireball EX 3.2AT or | ||
| | Seagate ST31722A | ||
|Quantum Fireball lct 20 10.2 AT | |||
or any of the earlier revision hard disk models. | |||
|- | |||
|Touchscreen Controller | |||
|3M Microtouch ISA Card PC BUS SMT3V (Serial) | |||
Elo IntelliTouch 2310 Serial Controller | |||
|3M Microtouch ISA Card PC BUS SMT3V (Serial) or | |||
Elo IntelliTouch 2310 Serial controller | |||
|} | |} | ||
Revision as of 22:25, 29 March 2024
History
This is the original Funworld Photo Play machine that took Europe by storm.
Hardware
These machines had two known hardware revisions. The original one and a later revision that was also installed as an upgrade kit as the original motherboards died.
The following hardware was used:
| Original Hardware | Later Revision (or upgraded) | |
|---|---|---|
| Motherboard | LS-486E Rev. C2 or | 5SFV0 (OEM Board made by Chaintech) |
| CPU | Intel 486 DX4 100 Mhz or | IDT WinChip C6 180 (C6-PSME180GA) (Normally underclocked to 133MHz) |
| RAM | 1 SIMM of 4MB EDO/FPM RAM | 1 DIMM of 16MB SDRAM |
| Graphics Card | Cirrus Logic CL-GD5440 1Mb PCI (Joytech Computer Co Ltd 54X62L) | Onboard Video (SIS 6306) |
| Sound Card | Embedded in the IO Card | Onboard Audio (ESS AudioDrive 1869F) |
| IO Card | PP2000/CI-8000 Rev. B ISA IO Board
This IO Board consisted of 2 Serial + 1 Parallel + iButton/Dallas Reader + ESS AudioDrive ES1868F Sound Chip + TDA1517 Amplifier. |
None. |
| Hard Disk | Quantum Fireball EX 3.2AT or
Seagate ST31722A |
Quantum Fireball lct 20 10.2 AT
or any of the earlier revision hard disk models. |
| Touchscreen Controller | 3M Microtouch ISA Card PC BUS SMT3V (Serial)
Elo IntelliTouch 2310 Serial Controller |
3M Microtouch ISA Card PC BUS SMT3V (Serial) or
Elo IntelliTouch 2310 Serial controller |
Software Versions
All PTS-DOS:
- 1998
- 1999
- 2000
- 2001
- I.G.O 2
- I.G.O 3
- I.G.O 4
- I.G.O 5
- I.G.O 6
- I.G.O 7
- I.G.O 8